9/6/2023 0 Comments Hp dvd1040 driver windows 10![]() That is, if the small rectangular connector (the jumper) on the drive is set to MS (Master), connect the master end of the IDE cable into the back of the drive. Replace the IDE cable and connect it according to the drive jumper settings. If the drive name appears in the Primary IDE section or the hard drive name is now missing, the IDE cable is bad or the drive settings are wrong. ![]() Work on a hard flat surface over a non-carpeted floor.ġ.Turn off the computer, unplug all cords from the PC, and then press the Power button on the front of the PC for five seconds.ģ.Remove both the IDE ribbon cable and the power cable from the back of the CD drive. If a drive name does not appear for each drive and None is listed in the BIOS, use these steps to open the computer case and reseat the drive cables. If the name for the drive exists, skip to Step 3. When the HP/Compaq logo screen appears, press the F1 key repeatedly until the BIOS Setup screen appears (on some models this key press may different, F2 or Del)Ģ.Use the Left and Right Arrow keys to select Main.ģ.The hardware-identifying name should appear next to Secondary Master, Secondary Slave, or Primary Slave. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |